Immigrate to Canada as an Electronics Assembler

Immigrate to Canada as an Electronics Assembler to fill up the vacancies with good income.

On the sight of any opportunity, Electronic Assemblers from different part of the world immigrate to Canada for greener pasture.

The job of an Electronics Assemblers is still on high demand because every province in Canada needs their services.

Interestingly, with your secondary school certificate and apprenticeship program you can easily immigrate to Canada as an Electronics Assembler.

In addition, as an Electronic Assembler wondering how to immigrate to Canada, this article will make available all the detail information, tips and guides you will need to immigrate to Canada as an Electronics Assembler.

Who is an Electronic Assembler?

Electronics assembler and fabricator assemble and fabricate electronic equipment, parts and components.

Interchangeably, electronics assembler can also be called Electronics inspector and tester because of the responsibilities of inspecting and testing electronic, electromechanical assemblies, subassemblies, parts and components to ensure conformance to prescribed standards.

Moreover, Electronics assembler can be employed in electronics manufacturing plants. The option to become self employed is also available.

What are the Main Duties of Electronics assembler and fabricator?

Electronics assembler and fabricator in Canada works under the national occupation code (NOC) code 9523.

However the duties of Electronics assembler and fabricator are subdivided according to their specializations or special skills in each job title.

Electronics assemblers

Their duties are stated below:

  • Solder and manually assemble various electronic components such as resistors, diodes, transistors, capacitors, integrated circuits, switches, wires and other electronic parts to designated locations on printed circuit boards
  • Assemble microcircuits requiring fine hand assembly, the use of microscopes and adherence to clean room procedures
  • Install, mount, fasten, align and adjust parts, components, wiring and harnesses to subassemblies and assemblies using hand and small power tools
  • Operate automatic and semi-automatic machines to position, solder and clean prescribed components on printed circuit boards
  • May replace defective components and repair and overhaul older devices.

Electronics fabricators

This category of people performs the following duties:

  • Operate and monitor process equipment including automatic and semi-automatic machines to fabricate electronic components, solder, clean, seal and stamp components and perform other process operations as specified
  • Set up process equipment and adhere to cleanroom procedures as required.

Electronics inspectors

The duties of people with this job title are stated below:

  • Inspect electronic components and assemblies to ensure correct component selection and placement, wiring and soldering quality, proper pin insertions, location and diameter of plated holes, breaks in circuitry and line spacing in printed circuit board and other specified requirements while products are being assembled or fabricated
  • Check final assembly for finish, labeling and packaging methods
  • Check mechanical dimensions and perform “go-no-go” electrical tests
  • Identify and mark acceptable and defective assemblies and return faulty assemblies to production for repair
  • Collect, record and summarize inspection results
  • Investigate equipment malfunction and instruct on proper operation.

Electronics testers

The duties of the people under this job title include:

  • Operate various test equipment and tools to perform simple electrical and continuity testing of electronic components, parts and systems
  • Set up and operate automatic testing equipment to locate circuit and wiring faults, shorts and component defects
  • Compare test results to specifications and set parts or products aside for repair or replace components or parts as indicated by test equipment
  • May conduct life tests (burn-ins) on components, subassemblies and assemblies
  • Maintain test result reports.

Examples of Job Titles to Immigrate to Canada as an Electronics assembler

Electronics assembler has so many job titles under it but certainly they are under the NOC code 9523.

As an intending immigrating Electronics assembler, you will sure find the job title that suits your skills in the occupation. Find below the examples of job titles.

  • aluminizing equipment operator – electronic equipment manufacturing
  • antenna-tuner inspector – electronic equipment manufacturing
  • assembler, inspector, tester – electronic equipment manufacturing
  • automatic component-assembly-machine operator – electronic equipment manufacturing
  • automatic wire-wrapping machine tender – electronic equipment manufacturing
  • backplane and frame wiring operator
  • base-filling machine operator – electronic equipment manufacturing
  • bench assembler – electronic equipment manufacturing
  • Capacitor assembler. Inspector
  • cathode coater – electronic equipment manufacturing
  • cathode-ray-tube-processing equipment setter
  • chassis assembler – electronic equipment manufacturing
  • component inspector, assembler – electronic equipment manufacturing
  • cone assembler – electronic equipment manufacturing
  • console assembler – electronic equipment manufacturing
  • conveyor line worker – electronic equipment manufacturing
  • crystal calibrator – electronic equipment manufacturing
  • crystal unit assembler
  • crystal-dicing saw operator
  • die attacher – electronic equipment manufacturing
  • diffusion furnace operator – electronic equipment manufacturing
  • dip-soldering machine operator – electronic equipment manufacturing
  • duplicating machine assembler
  • electrical wire group assembler – electronic equipment manufacturing
  • electron tube inspector and tester
  • electron tube stem assembly inspector
  • electronic business machine assembler
  • electronic cash register assembler
  • electronic component insertion colour coder
  • exhaust and sealing machine operator
  • exhaust equipment setter – electronic equipment manufacturing
  • filament stem inspector – electronic equipment manufacturing
  • filament tester – electronic equipment manufacturing
  • in-circuit test operator
  • inspector – electronic equipment manufacturing
  • installer – electronic equipment manufacturing
  • integrated circuit assembler
  • typewriter aligner
  • utility operator – electronic equipment manufacturing
  • vacuum evaporation process plater – electronic equipment manufacturing
  • variable capacitor tester
  • wafer fabrication lab technician – electronic equipment manufacturing
  • wave soldering machine operator
  • wire wound resistor inspector – electronic equipment manufacturing

Requirements to work in Canada as an Electronics assembler in Canada

Here are the employment requirements for Electronics assembler listed below. This will serve as a guide while you prepare to immigrate to Canada as an Electronics assembler.

  • Completion of secondary school is usually required for electronics assemblers, fabricators, inspectors and testers.
  • On-the-job training is usually provided for occupations in this unit group.
  • Two years apprenticeship program and trade certification for electronics assemblers are available but voluntary in Saskatchewan.
  • Electronics testers may require post-secondary courses in basic electronic theory, testing techniques and testing equipment.
  • Electronics inspectors and testers may require experience as an electronics assembler or component fabricator.

Exclusions under Electronics Assembler jobs in Canada

The jobs listed below might be similar to the jobs under the NOC code 9253 but they have their NOC code differently, therefore they are excluded jobs under Electronic assembler.

It is impossible to immigrate to Canada as an Electronic Assembler under their NOC codes.

  • 9524 – Assemblers and inspectors, electrical appliance, apparatus and equipment manufacturing.
  • 2241­- Electrical and electronics engineering technologists and technicians
  • 2242- Electronic service technicians (household and business equipment)
  • 9222- Supervisors, electronics manufacturing

Requirements to Immigrate to Canada as Electronics assembler

It is very important to meet up with both the general and specific requirements while applying to immigrate to Canada as an Electronics Assembler.

Interestingly, the two requirements form a support base for your Comprehensive Ranking system score during verification and assessment by Emigrate Canada panel.

Most importantly, you need to apply under an Express Entry program to become a Canadian permanent resident.

General Requirements

Age requirement

The age of 18 to 35 years is the most recommended because the chances are slim when you are 40 years and above.

Educational requirement

Must be a graduate of secondary school or a post-secondary institution with a trade certification and Educational Credential Assessment (ECA) report

English or French language skills requirement

English or French language proficiency test results are highly required for an immigrating Electronics assembler to Canada.

Examples of these tests include:-

  • International English Language Testing System (IELTS)
  • Test of English as a Foreign Language (TOEFL)
  • The Canadian Test of English for Scholars and Trainees (CanTEST)
  • Canadian English Language Proficiency Index Program (CELPIP)
  • Duolingo English Test (DET)
  • Pearson Test of English (PTE)
  • Canadian Academic English Language (CAEL) assessment
  • Test d’Evaluation de Français Canada (TEF Canada)
  • Test de Connaissance du Français Canada (TCF Canada)

Written job offer or arranged employment requirement

You can get a job offer or arranged by applying for jobs with Canadian employers.

Work experience requirement

Undoubtedly, you may to have a minimum of one (1) year work experience to increase CRS points. Having more than one year work experience will be a serious advantage to your placement and income.


You will definitely get more scores on the CRS if your spouse or common-law partner wants to immigrate to Canada too.

Specific requirements for Electronic Assembler in Canada

Here are the specific requirements an electronic assembler must meet while immigrating to Canada as an electronic assembler.

  • Trade certification is required in most provinces though voluntary in Saskatchewan.
  • A two-year apprenticeship program
  • For Electronics inspectors and testers’ additional training and work experience is required.
Immigrate to Canada as an Upholsterer

Pathways to immigrate to Canada as an Electronics Assembler

Reliably, express entry and provincial nomination program (PNP) are the most recommended pathway programs for immigrating electronics assemblers to Canada.

Express Entry

Advisably, an electronics assembler who is working smart to immigrate to Canada through express entry should choose Federal Skilled Trades Program (FSTP), it makes immigration process faster.

Other options include:

Provincial Nomination Program

Alternatively this pathway program makes it possible for to immigrate to Canada as an Electronics Assembler.

Notably, you will have to stay for minimum of two years in any province you secure a nomination before you can move to another province.

The following Canada’s provinces and territories offers nomination programs for immigrating electronics assemblers.

  • Alberta Immigrant Nominee Program (AINP)
  • British Columbia Provincial Nominee Program (BC PNP)
  • Manitoba Provincial Nominee Program (MPNP)
  • New Brunswick Provincial Nominee Program (NBPNP)
  • Newfoundland and Labrador Provincial Nominee Program (NL PNP)
  • Northwest Territories Nominee Program (NTNP)
  • Nova Scotia Provincial Nominee Program (NSPNP)
  • Ontario Immigrant Nominee Program (OINP)
  • Prince Edward Island Provincial Nominee Program (PEI PNP)
  • Saskatchewan Immigration Nominee Program (SINP)
  • Yukon Nominee Program (YNP)

Steps to immigrate to Canada as an Electronic Assembler

Indeed, the following steps will be helpful when you want to immigrate to Canada as a electronic assembler.

STEP 1: Create and submit your Express Entry profile

Unavoidably, you must create an Express Entry profile from the official website of Immigration, Refugees and Citizenship Canada (IRCC). This process is free, ensure you provide all necessary details to boost your comprehensive Ranking system score.

STEP 2: Complete permanent residency application

This step requires your swift action, that is, you must apply for your Permanent Residency (PR) to Canada within 60 days of being issued an Invitation to Apply (ITA).

STEP 3: Submit all supporting documents

This step requires that you submit all your documents for easy verification and assessments by the Emigrate Canada Consultants.

STEP 4: Fly to Canada

At this time, you need to expect a decision from IRCC as regards to your PR application.

Subsequently, you can schedule your flight with an airline in order to immigrate to Canada as an electronics assembler and permanent resident.

Frequently Asked Questions

What is welders NOC code?

NOC 9253

Is electronics assembling a good career in Canada?

Absolutely, it is because all provinces in Canada need their service.

How much does electronics assembler make in Canada?

An entry-level Electronics assembler with a minimum of one year but less than 5 years of experience can earn an average Salary of around $69300 while an Electronics assembler with mid-level experience can expect to earn an average total income of $98400 annually.


Immigrate to Canada as an Electronics Assembler using this guide to explore more benefits and opportunities.

You may share this article if you found it useful because it may be of help to others, thanks for reading, kindly drop a comment below.