in

Immigrate to Canada as a Finishing Machine Operator – Full Guide

Binding and finishing machine operators are needed in Canada.

Wonder how to immigrate to Canada as a finishing machine operator. You will get your answer here. This is because many companies in Canada are always in need of finishing and binding machine operators.

So, if you are a finishing machine operator, you can make use of this opportunity in Canada.

However, before you can make use of this opportunity, it is good that you know both the requirements and demands of the job in Canada. It is also necessary you read this post to know more about the requirements.

Hence, in this article, you are going to learn all you need to know about finishing machine operators in Canada. 

First of all, you will learn what finishing machine operators do in Canada. In addition, you will also know who can employ you as a finishing machine operator.

Secondly, you will learn a bit about the jobs and duties of finishing machine operators.

Thirdly, you will learn the best pathway to immigrate to Canada as a finishing machine operator.

Then, finally, you will also learn the step by step guide to enter Canada as a finishing machine operator.

What finishing machine operators do in Canada?

Binding and finishing machine operators have the NOC code number 9473. Over the years it has become an in-demand job in Canada.

As a result, there is an increasing need for immigrants to work in this position in many companies. Therefore, you can get employed once you enter Canada as a finishing machine operator.

However, you must know exactly what you need to do. Therefore, it is good that you know the main duties of binding and finishing machine operator.

The main duties of binding and finishing machine operators include to set up, operate or oversee the operation of machines, equipment or computerized units that bind and finish printed material.

Also included in their jobs is performing finishing operations in the paper, carton and packaging industries, as well as those who encode and stamp plastic cards.

As you can see, it is a very demanding job. As such, you will need physical strength for this job.  

Examples of Works under Finishing Machine Operators

The following jobs fall under the NOC code 9473. Therefore, they belong to binding and finishing machine operator jobs in Canada. Hence, you can use any of them to immigrate to Canada as a finishing machine operator. They include:

  • binder assistant
  • assistant bookbinder
  • book finisher
  • binder and finisher
  • binder and finisher
  • book binding machine operator
  • bindery machine operator
  • bindery operator
  • assistant binder
  • bindery worker
  • binding and finishing machine operator
  • blocking press operator
  • blocking press stamper
  • book trimmer
  • bookbinder assistant
  • binder
  • book-cutting machine operator
  • book-sewing machine operator
  • bronzer
  • bronzing machine tender
  • casing-in machine set-up operator 
  • casing-in machine tender
  • Cerlox binder operator
  • Cerlox binder operator
  • collating machine operator
  • continuous glue machine operator 
  • covering machine operator
  • credit card die-cutter operator
  • cutter operator
  • embossing/encoding machine tender 
  • cutting machine operator
  • cutting machine operator, books
  • design and lettering stamper
  • die-cutting or die-numbering press operator
  • die-cutting platen press operator 
  • embossing press operator
  • embossing press tender
  • finishing machine operator
  • foil stamper
  • bookbinder
  • foil-stamping platen press operator
  • folder operator
  • folding machine operator
  • gathering machine operator
  • gathering machine set-up operator 
  • gluing and folding machine operator 
  • gold leaf stamper
  • gold leaf stamper
  • guillotine cutter
  • guillotine operator
  • hand stitcher
  • headband and liner gluer
  • hologram-imprinting machine tender
  • machine binder 
  • inserting machine operator
  • laminating machine operator
  • laminating machine operator
  • machine bookbinder
  • machine bronzer
  • industrial binder
  • machine cutter
  • machine folder
  • perforating machine operator
  • machine side stitcher
  • machine stitcher
  • numbering machine operator
  • perfect-binder operator 
  • perfect-binder set-up operator
  • machine gatherer and gluer
  • perforating machine tender 
  • machine collator and gluer
  • perforator operator 
  • perforator tender
  • platen press operator, foil stamping
  • rounding and backing machine operator 
  • saddle stitching machine operator 
  • side stitching machine operator
  • spiral binding machine operator
  • stamping press operator
  • stitcher operator
  • spiral binding worker
  • stitcher set-up operator
  • stitcher-trimmer operator 
  • saddle stitching machine set-up operator 
  • stitching machine operator 
  • stitching machine set-up operator 

Jobs excluded from finishing machine operator

Even though these jobs are related to finishing machine operators, they do not fall under the category. Therefore, you can’t use them to immigrate to Canada as a finishing machine operator. 

  • Feeders, loaders, offbearers and similar occupations 
  • Hand bookbinders 
  • Printing press operators 
  • Supervisors, printing and related occupations 

Main duties of finishing machine operators in Canada 

The main duties of binding and finishing machine operators in Canada include:

  • Set up and operate specialized equipment and machines that cut, fold, gather and bind or finish brochures, pamphlets, business forms, magazines, books and other printed material
  • Set up and operate specialized equipment and machines that die cut, emboss, imprint, laminate, heat stamp and perform other finishing operations on printed material
  • Perform pre-production runs of binding or finishing jobs to verify output and to ensure that product specifications are met
  • Operate automatic and semi-automatic equipment and machines to bind or finish print material according to specifications
  • Pack, weigh and stack bound and finished products on pallet for shipment
  • May repair and rebind damaged or worn books.

Employment requirements to immigrate to Canada as a finishing machine operator

As a finishing machine operator you must meet the general requirements to immigrate to Canada as a foreign worker.

In addition to that, you must also meet certain specific requirements to immigrate to Canada as a finishing machine operator.

However, you must get high score in the comprehensive ranking system. This is because it is what determines if you can qualify. 

General requirements to work in Canada

Firstly of all, before you can enter Canada to work as a finishing machine operator, you must meet certain requirements. Hence, the general requirements for immigrating to Canada as a worker include:

  1. Language requirements
  2. Age requirements
  3. Education requirements
  4. Arranged employment
  5. Adaptability
  6. Work experience
  7. Your partner’s ability

#1: Language

First of all, before you can immigrate to Canada as a finishing machine operator, you must reach a certain language benchmark. This will show that you can work in Canada using the Canadian language.

#2: Age

Secodly, you must reach the minimum age to work in Canada. The minimum age to work in Canada is 18 year. Therefore, before you can immigrate to Canada as a finishing machine operator, you must be at least 18 years old. However, employers can employ children under the working age if they meet the requirements.

#3: Education

The minimum education to work in Canada as an immigrant is secondary school education. Therefore, in order to immigrate to Canada as a finishing machine operator, you must have completed your secondary school education. However, for some jobs, you must finish your University or college education before you can work in Canada.

#4: Arranged employment

Among the easiest ways to immigrate to Canada as a finishing machine operator is to arrange employment with a Canadian employer. However, the employer must show that no Canadian citizen or permanent resident can fill the position.

#5: Adaptability

Another factor that IRCC will check before allowing you to immigrate to Canada as a finishing machine operator is your adaptability in Canada. Therefore, you must provide a medical report showing that you are medically fit. In addition to that, you must be able to adapt to the working demands of your job.

#6: Work experience

Another deciding factor for immigrating to Canada as a finishing machine operator is your work experience. Therefore, if you have enough work experience, you can use the Canada experience class. However, there are other programs you can use.   

#7: Your partner’s ability

The work experience, skills, language proficiency and age of your spouse or common law partner can also help you to immigrate to Canada as a finishing machine operator. Therefore, if your spouse has worked in Canada or lived in Canada, you will have more chances.

Specific requirements to immigrate to Canada as a finishing machine operator

In addition to the general requirements mentioned above, there are specific requirements to immigrate to Canada as a finishing machine operator. Therefore, you must meet the requirements below:

  1. Completion of secondary school 
  2. Completion of a college program in graphic arts technology 
  3. A combination of on-the-job training and specialized college, industry or other courses is usually required.

Pathways to immigrate to Canada as a finishing machine operator

There is a growing need in Canada for finishing machine operators. Therefore, you can immigrate to Canada as a finishing machine operator under any of the following programs: 

  1. Express entry
  2. Provincial Nominee Programs
  3. In-Demand occupations
  4. Job offer
  5. Quebec Experience Class

1: Express entry

The Canada express entry has three programs under it for workers who want to  immigrate to Canada as a finishing machine operator. As such you can check to know if  you qualify for any of these programs. The programs include: 

In order to immigrate to Canada as a finishing machine operator, the best program here is the Federal skilled worker program. However, if you have the needed experience, you can as well apply under Canada Experience Class. 

2: Provincial Nominee Program

There is a provincial nominee program for every province in Canada. Therefore, if you plan to immigrate to Canada as a finishing machine operator, you can use any of them. However, you must plan to live as well as work in that province. In addition to that, you must meet other requirements in the province.

3: In-Demand occupations

Since binding and finishing machine operator falls under the in-demand jobs in Canada, you can as well use it as an option to immigrate to Canada. However, before you can use this pathway, you must have a valid job offer from a Canadian employer.

4: Job offer

This is an easy pathway to immigrate to Canada as a finishing machine operator. However, before you can do this, you must get a valid job offer from a Canadian employer. In addition, the employer must get a certificate from the Labour Market Impact Assessment before employing.

Also, your employer must prove that you are the best for the position. What this means is that no one Canadian citizen or permanent resident qualifies for the position.

5: Quebec Experience Class

Immigrants who want to immigrate to Canada and work in Quebec have a special program. This program allows them to live and work in the province of Quebec.

However, before they can immigrate to Quebec, they must show a proof of proficiency in French language.in addition, they must intend to live and work in Quebec.

Steps to immigrate to Canada as a finishing machine operator

Basically, immigrating to work in Canada is an easy task. However, you may still need expert guide to make it simpler. Hence, we provide you this step by step guide on how to immigrate to Canada as a worker.

Therefore, you can follow the steps below to immigrate to Canada as a finishing machine operator:

Step 1 : Sign up to express entry 

The first step towards immigrating to Canada as a finishing machine operator is to visit the IRCC website and sign up. This sign up means creating an express entry profile.

Generally, without an express entry profile, you cannot receive updates about Canada immigration.

Therefore, you must open an account. In addition, you must frequently visit the profile to check for updates. In addition to that, you will get notifications through your profile.

Step 2: Enter a program

Secondly, you must choose the best program that suits your profile. Therefore, you must check to know the program that you qualify for. The programs include:

Step 3: Find a job in Canada

If you want to immigrate to Canada as a finishing machine operator easily, you will have to find a job in Canada. With a valid job offer, you will score more points in the CRS. Hence, your chances of getting an invitation to apply increase. 

However, your employer must prove that no Canadian citizen or permanent resident can fill the position.

Step 4: Receive an invitation to apply

One of the best moments is when you get an invitation to apply. Therefore, you must do everything possible to reach this moment. So, if you are among the applicants with highest points, you will receive an invitation to apply. You must reply within 60 days of receiving an invitation to apply. Therefore, all your supporting documents must be ready.

Step 5: Submit your application with supporting documents 

The next move after getting an invitation to apply is to submit your application. In addition to the application, you must include all the necessary documents. Without the supporting documents, your application will not be processed. Therefore, make sure that everything is complete before you submit the application.

In addition to that, you must include an application fee of CAD $150. 

Step 6: Get your work permit

Within 28 days of submitting your application, you will receive the final report about your application. Therefore, you must be prepared.

So, if you are successful, you will receive a letter telling you that you have been issued a work permit.

However, if you don’t get such an email, check to see if your documents are complete or if there is an incorrect detail in your account. If such is the case, resend the application. However, your chances this time is very low.

Step 7: Congratulations

Finally, congratulations for a successful work permit to immigrate to Canada as a finishing machine operator. However, you will get your work permit once you enter Canada.

If, on the contrary, you are not able to get it, you must book an appointment with an immigration officer on the date to come back for your work visa.

Immigrate to Canada as a Cafe Manager

Frequently Asked Questions

Do I need a job offer to immigrate to Canada as a finishing machine operator?

No, job offers are not compulsory. However, with a valid job offer, you will immigrate to Canada as a finishing machine operator easily.

What is the average salary of a finishing machine operator? 

An average finishing and binding machine operator in Canada earns around CAD $78,400 annually. However, depending on your experience and qualifications you can earn more or less.

What is the processing time for a work visa to enter Canada as a finishing machine operator?

The processing time for a Canadian work visa is between 3 and 6 months. Sometimes, there may delays. So, when there is such, you must check to know if you missed any document.

Who can employ finishing machine operators in Canada?

If you immigrate to Canada as a finishing machine operator, you can be employed by binderies, commercial printing companies, newspapers, magazines, and other publishing companies. This can be both the public and private sectors that have in-house printing, binding and finishing departments.

Conclusion

Finally, if you desire to immigrate to Canada as a finishing machine operator, it is now easy for you. However, you must adhere to the requirements and steps above.