Immigrate to Canada as a Lumber Processing Inspector

As a foreign worker, you can immigrate to Canada as a lumber processing inspector if you have the necessary requirements to work in Canada.

These requirements are the only conditions that can allow you to be part of the workforce in Canada.

More so, if you can speak the Canadian language (English and French) well, you have a good chance of getting a work permit in to work as a lumber processing inspector in Canada.

Apparently, if you have previous experience working in Canada, it also adds to your Comprehensive Ranking System. 

Therefore, your chances of immigrating to Canada to work as a lumber processing inspector depends totally on the requirements you meet.

Of course, you should know that apart from the requirements, there are other conditions you must meet and the steps to immigrate to Canada as a lumber processing inspector.

What does a lumber processing inspector do?

Lumber graders and other wood processing inspectors and graders inspect and grade lumber, wafer board and similar wood products to identify defects and classify products according to industry standards.

However, the lumber graders determine the value of wood for distribution.

A lumber inspector, also called a lumber grader, uses visual evaluation and measurements to grade lumber products based on The National Lumber Grades Authority (NLGA) standards in Canada.

In addition, lumber inspector responsibilities includes examining the lumber after cuts for knots, holes, splits, and other defects, measuring the lumber for thickness, length, and width to ensure they meet specifications.

They are employed by sawmills, planning mills, wood treatment plants, wafer board plants and other wood processing companies.

Job descriptions of a lumber processing inspector

However, if you are planning to immigrate to Canada as a lumber processing inspector, below are likely duties and responsibilities that will be assigned to you as a lumber grader.

Lumber graders

The duties of lumber graders includes:

• Lumber graders examine lumber visually for knots, holes, splits and other defects and sort for further drying, trimming or remanufacturing.
• They measure lumber using calipers, gauges and tape measures to ensure specified thickness, length and width
• Lumber graders classify and sort lumber according to industry standards and stamp lumber to indicate grade, wood type, moisture level and other characteristics
• In addition, they tally lumber, complete and maintain reports.

Other wood processing inspectors and graders

The duties of wood processing inspectors includes:

• Inspect plywood panels, veneer sheets, panelboards, shingles and similar wood products visually for knots, holes, splits, straightness and other defects
• Further more, they mark defects and sort for repair or reprocessing
• More so, they measure wood products to ensure conformance to specifications using standard measuring instruments
• Additionally, they grade and label wood products according to quality standards
• Finally, they complete and maintain inspection and grading reports.

Examples of jobs under lumber processing inspector

If you qualify under the NOC code 9436 lumber processing inspector in Canada, you can get employment opportunity under the following job titles.

Hence, you can immigrate to Canada as a lumber processing inspector if you do one or more of them. They include:

• Board grader – wood processing
• Flooring grader – wood processing
• Grader – wood processing
• Green lumber grader
• Inspector – wood processing
• Lumber grader
• Panel inspector – wood processing
• Particleboard grader – wood processing
• Planer grader – wood processing
• Plywood inspector – wood processing
• Pole inspector – wood processing
• Shake inspector – wood processing
• Shingle inspector – wood processing
• Stake grader – wood processing
• Tie and timber inspector
• Treated pole tester – wood processing
• Veneer and plywood grader – wood processing
• Wood processing grader among others.

Jobs excluded from furniture assembler and inspector in Canada

However, the following jobs are not included in jobs you can do as a lumber processing inspector in Canada.

• Forest products technologists (See 2211 Chemical technologists and technicians)
• Log scalers (See 2223 Forestry technologists and technicians)
• Production technologists in sawmills (See 2233 Industrial engineering and manufacturing technologists and technicians)
• Supervisors, forest products processing (See 9215 Supervisors, forest products processing)

Requirements to Immigrate to Canada as a lumber processing inspector

The requirements to immigrate to Canada as a lumber processing inspector are divided into two (2) segments namely:

1. General requirements
2. Specific requirements

General Requirements to immigrate to Canada as a lumber processing inspector

Apparently, the common necessities for moving to Canada as a lumber processing inspector includes:

• Language requirements
• Age requirements
• Education requirements
• Arranged employment
• Adaptability
• Work experience
• Your partner’s ability

Language requirements

First of all, before you’ll be able to move to Canada, you must reach a certain language benchmark. This will make it simple for you to work in Canada utilizing the Canadian language.

Age requirements

The minimum age to work in Canada is 18 years. Therefore, before you will be able to move to Canada as a lumber processing inspector, you must be at most 18 years old.

Education requirements

The least educational level to work in Canada as an immigrant is secondary school education.

Nevertheless, before you can immigrate to Canada as a worker, you must get your academic report from the Educational Credential Assessment (ECA).

Arranged employment

Here, you need to have a valid job offer from a Canadian employer. This is one of the easiest ways to immigrate to Canada for work.

Therefore, as a lumber processing inspector, you can get a job offer in Canada and use it to immigrate to Canada easily.

Adaptability

Before you can be permitted to immigrate to Canada as a lumber processing inspector, you must be able to adapt to the Canadian weather condition and working culture.

Therefore, you must provide proof of your medical fitness from a doctor approved by the Canadian government.

Work experience

Work experience is another requirement to immigrate to Canada as a lumber processing inspector. It is usually an advantage when you have an experience in the job.

Therefore, with enough work experience, you can immigrate to Canada as a lumber processing inspector.

Your partner’s ability

In addition to the above mentioned criteria, your spouse’s work experience, skills, language proficiency as well as age can help you score high.

Hence, you must include all these while filling your form. Therefore, as a lumber inspector, your spouse’s skills and work experience can help you to immigrate to Canada.

Specific requirements to immigrate to Canada as a lumber processing inspector

These are the requirements peculiar to your profession as a lumber processing inspector. Therefore, to immigrate to Canada as a lumber processing inspector, you must meet these employment requirements:

• Completion of secondary school is usually required.
• On-the-job training and up to two weeks of classroom training are provided for lumber graders.
• Previous experience as a sawmill machine operator, other wood processing operator or as a labourer in wood processing is usually required for graders and inspectors in this unit group.
• Lumber graders require a lumber grader’s license issued by a provincial lumber association.

Immigrate to Canada as a Licensed Practical Nurse

 Pathway programs to immigrate to Canada as a lumber processing inspector

There are numerous pathway options to immigrate to Canada as a lumber processing inspector. They include:

• Express entry program
• Provincial nominee program
• In-demand occupation
• Job offer
• Quebec Experience Class

Express entry program

The Canada express entry section has three programs under it for skilled workers who want to move to Canada a lumber processing inspector.

As such, you will check to know if you qualify for any of these programs. The programs include:

• Canada experience class(CEC)
• Federal skilled worker program(FSWP)
• Federal skilled trades program (FSTP)

Provincial nominee program

There could be a provincial nominee program for each province in Canada. If you want to move to Canada as a lumber processing inspector, you can utilize any of these programs.

However, each province in Canada organizes the Nominee Program. Thus, before you can use a provincial nominee program, you must decide to live and work in the province.

In-Demand occupations

Lumber processing inspector falls under the in demand employment in Canada. You can as well utilize it as an alternative to immigrate to Canada.

Moreover, since many companies are looking for lumber inspector, the job has become an in-demand job in Canada. Therefore, you can use this pathway to immigrate to Canada.

Job offer

This is a simple pathway to immigrate to Canada as a lumber processing inspector.

However, if you are planning to immigrate to Canada as a lumber processing inspector, you should get a substantial work offer from a Canadian boss.

Quebec Experience Class

If you are planning to live and work in Quebec as a lumber processing inspector, this is the best immigration program for you. However, you must show proof of French language proficiency.

Apart from that, you must meet other requirements for the program. Otherwise, you may not qualify.

Steps to immigrate to Canada as a lumber processing inspector

Below are the steps to take once you have decided to immigrate to Canada as a lumber processing inspector.

Step 1: Sign up for an express entry

Firstly, a step towards moving to Canada as a lumber processing inspector is to visit the IRCC site and sign up. This sign-up implies making an express entry profile.

However, without an express entry profile, you cannot get overhauls around Canadian immigration. Therefore, you must open an account. In addition, you must visit your profile regularly to check for updates.

Step 2: Enter a program 

Secondly, you must select the best program that suits your profile. Here, you must check to know the program that you qualify for. The programs are:

• Canada experience class (CEC)
• Federal skilled worker program (FSWP)
• Federal skilled trades program (FSTP)

Step 3: Get a job offer in Canada 

Apparently, if you need to move to Canada as a lumber processing inspector, with substantial work offer, you may score more points on the CRS.

However, your employer must demonstrate that no Canadian citizen or lasting inhabitant can apply for the position.

More so, the employer will approve that no employee in Canada can perform that role or function and take permission from the labour market impact Assessment (LMIA).

Step 4: Get an invitation to apply 

Apparently, if you are among the candidates with the most elevated points, you will get a welcome to apply. You must answer within 60 days of getting an invitation to apply.

Subsequently, all your supporting documents must be ready before the said date.

Step 5: Submit your application with supporting documents 

The next action after getting an invitation to apply is to submit your application. In addition to the application, you must submit all the essential documents.

Additionally, you will have to add an application fee of CAD150.

Step 6: Get your work permit

However, within one month of submitting your application, you may receive the ultimate report around your application.

If you are successful, you receive a mail telling you that have been issued a work permit.

More so, if you are not able to collect your work permit immediately at the port of entry, you can book an appointment with the officer in charge.

Frequently Asked Questions

What is the annual salary of a lumber grader in Canada?

The annual salary of a lumber grader in Canada is $40,950 per year.

What is the NOC code of lumber processing inspector in Canada?

The NOC code of a lumber processing inspector is 9436.

Conclusion

Lumber inspectors play a critical role in a company’s profitability by evaluating the grade, species and volume of lumber.

Additionally, inspectors closely follow standards to maintain accuracy and fairness in grading.