Immigrate to Canada as a Products Assembler and Inspector
Knowing fully well that you can immigrate to Canada as a product assembler, you can as well become a permanent resident in Canada.
As a member of the Canadian community you get to live a standard way of life, enjoy the best of work experience, social amenities, and a stable economy.
Moreover, employment agencies and job sites in Canada are perfect ways of searching and applying for product assembler and inspector.
In addition to getting a job, you also get massive benefits working as a product assembler and inspector in Canada.
This article will guide you on the type of jobs available for you as a product assembler, pathways, employment requirements and the steps to immigrate to Canada as a Product assembler.
Who is a product assembler and inspector?
A product assembler works in a warehouse environment or for a manufacturer, producing components that require the assembly of parts. You can assemble these components by hand or with small tools.
More so, Product inspectors inspects finished products for conformance to specifications using fixed or present measuring instruments. They check for irregularities and ensures that final products are of good quality.
Other products assemblers, finishers and inspectors assemble, finish and inspect components or products of various materials, such as silverware, buttons, pencils, musical instruments, sporting goods, toys and other miscellaneous products.
However, the daily tasks of an Assembler rely largely on the industry they are working in. Generally, a product assembler uses a variety of tools to manufacture products.
In addition, product assembler is responsible for reviewing the quality of parts and materials used in production. They take inventory of parts and tools used in the assembling process.
However, they follow company procedures and directives and test finished products for defects. Product assemblers work in a wide variety of manufacturing companies.
Generally, in Canada, every job is assigned a code in the National Occupation Classification System, and the code for Other products assemblers, finishers and inspectors is 9537.
What are the responsibilities of a product assembler and inspector?
Here are examples of responsibilities representing typical tasks they are likely to perform in their roles.
Assemblers and finishers
- Operate machines or use hand tools to cut, shape and fit materials to form parts and to fabricate components or products.
- Load supplies into hoppers of dispensing units or manually align, feed or otherwise place materials into machines.
- Screw, clip, glue, bond, weld or otherwise assemble parts and components to form final products.
- Sand, trim, grind or clean products into final form using hand tools.
- Clean work stations and remove scraps, dust, shavings or other by-products from machinery and surrounding areas.
- May make routine changes of dies, nozzles or other machinery attachments as required.
Inspectors
- Check manufactured items for defects and for conformance to specifications, visually or using sample models and instruments.
- Affix seals or tags to approved items and return defective products for repair or recycle.
- Complete reports on product inspection.
Examples of jobs under product assembler and inspector
As a product assembler and inspector in Canada, there are chances that you can be employed under any of the following job titles.
- Antenna assembler
- Bicycle assembler
- Brush making machine operator
- Button machine operator
- Camera assembly inspector
- Crayon making machine tender
- Eyeglass frame assembler
- Golf club assembler
- jewellery annealer
- Jewellery inspector
- Lampshade assembler
- Piano assembly inspector
- Prism maker operator
- Skate press operator
- Sports ball moulder
- Stuffing machine tender
- Tennis maker operator
- Toy inspector
- Venetian blind assembler
- Watch assembler among others.
Exclusions
- Supervisors, other products manufacturing and assembly (See 9227 Supervisors, other products manufacturing and assembly)
Requirements to immigrate to Canada as a product assembler and inspector
Generally, to immigrate to Canada, there are some requirements you need to meet up with, this requirements includes the general and specific requirements.
General requirements to immigrate to Canada as a worker
- Language proficiency
- Educational qualifications
- Age
- Work experience
- Spouse ability
- Weather conditions
Language proficiency
Generally, language proficiency is one of the major requirements for those who wish to immigrate to Canada as a product assembler and inspector.
Therefore, if you want to immigrate to Canada as a product assembler, you must be good in speaking, reading and writing English and French, which are the official languages in Canada.
You can submit any of these language proficiency tests results. They include:
- International English Language Testing System (IELTS)
- Test de Connaissance du Français Canada (TCF)
- Canadian Academic English Language assessment (CAEL)
- Test of English as a Foreign Language (TOEFL)
- Test d’Evaluation de Français Canada (TEF)
Educational qualifications
Usually in Canada, every immigrant seeking for employment must have some educational qualification such as completing your high school education or have an ordinary level certificate.
However, if you are thinking of immigrating to Canada as a product assembler and inspector, you must meet the educational requirements.
 Age
You must be at least 18 years to immigrate to Canada as a product assembler and inspector.
Work experience
Normally, work experience is required as one of the basics to work in Canada as a product assembler and inspector.
When planning to work in Canada, you must have proof for your profession through the experiences you have gathered in your previous working places.
Spouse ability
The work experience, skills, language proficiency and age of your spouse or common law partner can also help you to immigrate to Canada as a product assembler and inspector.
More over, this helps to increase your Comprehensive Ranking System (CRS) point.
Weather condition
Generally speaking, immigrating to Canada as a product assembler and inspector may require your ability to adapt to the new environment, the weather, and the working conditions in Canada.
However, if you cannot cope with these changes you may not be able to immigrate to Canada.
Specific requirements to immigrate to Canada as a product assembler and inspector
Below are the specific requirements to immigrate to Canada as a product assembler and inspector.
- Some secondary school education is usually required.
- Experience as a manufacturing labourer in the same company may be required.
- On-the-job training is provided.
Additional information
- There is little or no mobility among the various assemblers and inspectors in this unit group.
- It important to note that progression to supervisory positions is possible with experience.
Pathways to immigrate to Canada as a product assembler and inspector
There are different ways you can immigrate to Canada as a product assembler and inspector.
Therefore, this can be done under any of the following pathways
Express Entry program
Express entry program is a common pathway to immigrate to Canada as a product assembler and inspector.
However, you must choose the best program among the option in the express entry program. They include:
Definitely, Express entry program is definitely the simplest pathway to immigrate to Canada as a product assembler and inspector.
In order to immigrate to Canada through this program, you must be able to choose the correct option that goes in line with your occupation.
Additionally, the Express entry program is one of the fastest way to immigrate to Canada as a product assembler.
Provinces Nominee programs
Indeed, Provincial Nominee program is an organized program established by a province. All provinces have their qualification for immigrants who want to work in their province.
However, if you immigrate to Canada through this program, you will be expected to live and work in the nominating province for a period of two years.
After those two years, you will be free to live and work anywhere in Canada. You can easily apply for a permanent residency through the Provincial nominee programs (PNPs).
The following are examples of Provincial Nominee Programs:
- Alberta immigration nominee program (AINP).
- British Columbia Provincial nominee program (MPNP)
- New founded Labrador provincial nominee program (NLNP).
- Northwest Territories nominee program (NTNP).
- Nova Scotia Provincial nominee program (NSNP)
- Prince Edward Island provincial nominee program (PEI PNP).
- Yukon nominee program (YNP).
- Saskatchewan immigration nominee program (SINP)
 In-demand jobs
You can immigrate to Canada as a product assembler and inspector through National Occupational Classification (NOC) code.
However, if you find your job in the NOC code of in-demand occupations in Canada, you can apply directly to immigrate to Canada as a product assembler and inspector.
Steps to immigrate to Canada as a product assembler and inspector
Indeed, there are steps you need to guide you through the processes of immigrating to Canada as a product assembler. These steps include:
Step 1: Express entry
To immigrate to Canada as a product assembler and inspector, the first step is to open an express entry account. You can check your eligibility status and options free with no obligation.
Normally, if you want to open this account, you will visit the IRCC official website to assist you.
 Step 2: Choose a program
The second Step in this process is for you to choose the best program that suite your profile.
Most importantly, you must choose a program that matches your occupation as a product assembler and inspector.
Step 3: Job offer
Get a job offer from a Canadian employer if you want to immigrate to Canada as a product assembler and inspector.
However, before you can find a job under this category, you must meet the requirements for the job. You employer will help you out with necessary information about the job.
In addition, your employer must get a clearance from the Labour Market Impact Assessment (LMIA) and approve that no employee in or outside Canada can perform that role or function.
Step 4: Invitation to apply (ITA)
You will be notified to apply, but this happens when you qualify for any program under the Express Entry system you have chosen.
However, many factors will determine your qualification to apply such as age, language proficiency result, educational qualification, work experience and others.
Step 5: Submit your application with supporting documents
The next step is to submit the application with other supporting documents. If you receive a mail to apply.
Most importantly, you should try to submit early and submit all the necessary documents in the right format.
Step 6: Get your work permit
Finally, you can now apply for a work permit when you land in Canada in the port of entry. You can do this within 30 days.
However, if you are not able to collect your work permit immediately at the port of entry, you can book an appointment with the officer in charge.
Frequently Asked Questions
What is the annual salary of a product assembler in Canada?
The annual salary of a product assembler in Canada is $32,744 per year.
Am I eligible to immigrate to Canada as a Products assembler and inspector?
Yes. Once you’ve satisfied the occupational and educational requirements to migrate to Canada as a Products assembler and inspector.
Conclusion
In closing, product assemblers pay close attention to detail to avoid assembly errors that could delay production goals and keep their work area clean of all unnecessary items to prevent cluttering.
We hope that this article provides you with the necessary information you need to relocate to Canada as a product assembler and inspector.