immigrate to Canada as a sawmill machine operator
Home » Immigrate to Canada as a Sawmill Machine Operator

Immigrate to Canada as a Sawmill Machine Operator

Are you on the lookout for how to immigrate to Canada as a sawmill machine operator? Then, this article is mainly for you.

Generally speaking, sawmill machine operators earn an average of $20 to 30 Canadian Dollars every hour in Canada.

Their services are essential to planning mills and sawmills in Canada. These Canadian establishments include Wood Working Company, Fontaine Inc., Harry Freeman & Son Limited, Bersaco Inc., Williams Brothers (2013) Ltd., Dhaliwal Ventures Inc., etc.

Moreover, working in Canada as a sawmill machine operator needs little or no work experience, special license, or certification.

After completing your high school education, you are also eligible for sawmill machine operating jobs.

Hence, this article will make you understand everything you need to know to immigrate to Canada as a sawmill machine operator.

For the most part, you will learn about possible immigration routes, immigration criteria, and work requirements relevant to sawmill machine operators in Canada.

What do sawmill machine operators do?

Indeed, sawmill machine operators operate, monitor and control automated lumbermill equipment to saw timber logs into rough lumber.

They certainly saw, trim and plane rough lumber into dressed lumber of several sizes, as well as saw or split shingles and shakes.

Besides, sawmill machine operators are hired by numerous sawmills and planning mills across Canada’s provinces and territories.

Moreover, the National Occupational Classification (NOC) code for sawmill machine operators in Canada is 9431.

Undoubtedly, this NOC code is the grouping for all sawmill machine operating jobs in Canada.

Job descriptions/duties of sawmill machine operators

Undoubtedly, the services of sawmill machine operators are always required in the operations of sawmills and planing mills.

As you apply to immigrate to Canada as a sawmill machine operator, it is equally important to take note of all your job duties, which include:-

  • Operating front-end loaders and stationary deck cranes to feed logs into the sawmill
  • Checking logs and rough lumber to find out several features such as sizes, condition, and quality to decide the best lumber cuts to perform, or use automated equipment to move logs through laser scanners, which determine the most effective and lucrative cutting patterns.
  • Operating automated lumbermill from consoles or control rooms to saw logs into rough lumber; saw, trim and plane rough lumber into dressed lumber of different sizes, sawing or splitting shingles and shakes.
  • Starting a conveyor system to convey logs and lumber to and from saws.
  • Setting up and adjusting saw equipment and replacing blades or bands via hand tools such as wrenches, gauges, etc.
  • Operating equipment to sort and pile lumber based on length and thickness, conveying stacks to storage areas or drying kilns, as well as feeding lumber via planers
  • Monitoring movement of lumber and computer screens to ascertain that cuts are made as per preference and print production reports
  • Cleaning and applying lubricant to sawmill equipment

Examples of jobs under NOC 9431

Below are lists of occupations under NOC 9431 as sawmill machine operators.

  • automatic edger operator – sawmill
  • block splitter – sawmill
  • board sawyer – sawmill
  • bolt sawyer – sawmill
  • bolterman/woman – sawmill
  • canter operator – sawmill
  • chip reclaim operator – sawmill
  • Chip-N-Saw operator – sawmill
  • circular saw operator
  • circular saw operator – sawmill
  • cut-off saw operator – sawmill
  • drag saw operator – sawmill
  • edger – sawmill
  • edgerman/woman
  • edgerman/woman – sawmill
  • gang sawyer – sawmill
  • head sawyer
  • head sawyer – sawmill
  • headrig operator – sawmill
  • head-saw operator – sawmill
  • high-speed stud operator – sawmill
  • log gang (saw operator – sawmill, as well as log gang sawyer – sawmill)
  • jumbo operator – sawmill
  • log cut-off (operator, operator – sawmill, as well as log cut-off sawyer – sawmill)
  • lumber sizer operator – sawmill
  • log hoist operator – sawmill
  • machine splitter – sawmill
  • log haul cut-off saw operator – sawmill
  • planer (operator, planer – sawmill, as well as planer operator – sawmill)
  • planerman/woman – sawmill
  • planer mill machine operator
  • resaw (operator, as well as resaw operator – sawmill)
  • resawyer – sawmill
  • ripsaw operator – sawmill
  • saw operator – sawmill
  • sawdust reclaim operator – sawmill
  • sawing machine operator – sawmill
  • sawmill machine operator
  • sawyer – sawmill
  • scrag-saw operator – sawmill
  • shake (maker, sawyer, sawyer – sawmill, as well as shake splitter)
  • shingle (cutter, shingle cutter – sawmill, maker, as well as shingle sawyer)
  • slab saw operator
  • slasher (operator – sawmill, saw operator – sawmill, as well as slasher trim operator – sawmill)
  • splitter (operator – sawmill, as well as splitter – sawmill)
  • stave (bolt saw operator, as well as stave bolt sawyer – sawmill)
  • tilt-hoist operator – sawmill
  • timber cut-off sawyer – sawmill
  • transfer operator – sawmill
  • trim (saw operator – sawmill, as well as trim sawyer – sawmill)
  • trimmer (operator – sawmill, as well as trimmer tender – sawmill)
  • trimmerman/woman (including trimmerman/woman sawmill)
  • trimming machine (operator – sawmill, as well as trimming machine tender – sawmill)

Requirements to work in Canada as a sawmill machine operator

Before legally working in Canada as a sawmill machine operator, you must meet some requirements as follows.

  • Must have graduated from high school
  • Completing college courses in wood processing technology
  • Partaking in On-The-Job (OTJ) training for many weeks
  • Industrial first aid certification is sometimes required.
  • Head sawyers and planer operators mostly need vast years of work experience in other sawmill machine operating positions at the same company.

Exclusion under sawmill machine operators

The following occupations have exemptions under NOC 9431.

  • 9215 – Supervisors, forest products processing
  • 9434 – Other wood processing machine operators
  • 9436 – Lumber graders and other wood processing inspectors and graders
  • 9437 – Woodworking machine operators
  • 9614 – Labourers in wood, pulp, and paper processing

Requirements to immigrate to Canada as a sawmill machine operator

Several requirements must be considered before you can immigrate to Canada as a sawmill machine operator.

General requirements

The following are the general requirements to immigrate to Canada.

  •  Age requirement: If you are not less than 18 or above 35 years old, you are eligible for 12 points on the Express Entry Comprehensive Ranking System (CRS).
  •  Educational requirement: Completing secondary school or post-secondary education is required together with an Educational Credential Assessment (ECA) report, which helps verify your foreign certificates.
  •  Language proficiency requirements: Test your English or French language skills by enrolling in IELTS, TOEFL, CELPIP, Duolingo English Test, TCF, or TEF.
  • Arranged employment: Arranged employment is also known as a job offer and helps earn an additional 10 points on the CRS.
  • Work experience: Your work experience in a full-time job can qualify you for 9 to 18 points on the CRS, depending on your years of experience.
  • Adaptability: 10 points are offered to both couples for adaptability if your spouse or common-law partner is willing to immigrate to Canada with you.
  • Provincial nomination certificate (only for PNP applicants): You will get a supplemental point of 600 on the Comprehensive Ranking System (CRS) if you have a nomination certificate issued by a Canadian province or territory.

Immigrate to Canada as a Pipefitter

Pathways to immigrate to Canada as a sawmill machine operator

Emphatically, sawmill machine operators have two immigration routes or pathways that create possibilities for immigration to anywhere in Canada.

These include:-

  1. Express Entry program
  2. Provincial Nominee Programs (PNPs).

#1 Express Entry program

As an occupation in demand, sawmill machine operators can become Canadian permanent residents and work for any sawmills or planing mills nationwide through the Express Entry program.

Undeniably, Express Entry is the most renowned pathway used by foreigners to immigrate to Canada.

It is processed on time compared to other immigration pathways.

Therefore, you must apply through Express Entry Federal Skilled Trades Program (FSTP).

#2 Provincial Nominee Programs (PNPs)

Without a doubt, you can accomplish your desire to work and live permanently in a particular province or territory through any of Canada’s Provincial Nominee Programs (PNPs), such as:-

Steps to immigrate to Canada as a sawmill machine operator

You need to follow the steps below to immigrate to Canada as a sawmill machine operator.

STEP 1: Complete form for the Express Entry profile

Before anything else, you must have an Express Entry profile for yourself. Indeed, you can do this online on IRCC’s website by filling out all fields on the application form.

STEP 2: Choose an immigration pathway and apply

This is the second step involved in immigrating to Canada as a sawmill machine operator.

Here, you must apply under one of the immigration routes or pathways available for sawmill machine operators to immigrate to Canada.

Thus, you are required to choose from Canada’s Express Entry program or one of the Provincial Nominee Programs (PNPs).

Subsequently, you must update your Express Entry profile and submit it online for assessment.

Besides, PNP applicants need to undertake further step, which involves getting a nomination by contacting a province or territory in Canada.

STEP 3: Apply for permanent residency

Permanent residency grants you the authorization to live and work as long as you desire in Canada, even without a work permit.

Of course, you can only apply for PR after receiving an Invitation to Apply (ITA). Moreover, your PR application must be sent to IRCC within 60 days.

STEP 4: Travel to Canada

You can pay for your flight to Canada and immigrate shortly after your PR approves.

Frequently Asked Questions

What is the sawmill machine operator NOC code?

The code is NOC 9431

What is the average salary of sawmill machine operators in Canada?

Ranges from CAD 20 to CAD 30 per hour

How much do sawmill machine operators make in Canada in a year?

On average, sawmill machine operators make up to CAD 60,000 every year in Canada


You can take your pick from the available immigration programs and start applying to immigrate to Canada as a sawmill machine operator. After all, immigrating to Canada from any nation is quite easy, as has been noted.


Share this update:

Similar Posts