in

Immigrate to Canada as a Structural Metal Fabricator

With this full guide, you can be the next lucky person to immigrate to Canada as a Structural Metal Fabricator

To immigrate to Canada as a Structural Metal Fabricator, there are procedures, steps, and  pathways you need to follow for a successful immigration.

No doubt, Canada is a country filled with lots of job opportunities for immigrants who wants to work in Canada. However, as a foreigner who wants to immigrate to Canada as a Structural Metal Fabricator, you also have the opportunity to Secure a permanent residence visa.

Currently, lots of foreigners are gaining entry into Canada as a Structural Metal Fabricator because of the high increase in demand for structural metal fabricators in Canada. Furthermore, you can immigrate to Canada as a Structural Metal Fabricator if you meet up with the requirements needed.

In this article, we will guide and direct you on how to immigrate to Canada as a structural Metal fabricator.

In addition, you will learn the important steps and pathways you need to immigrate to Canada as a structural metal fabricator, as well as the requirements, duties and examples of jobs titles available for structural metal fabricators in Canada.

Who is a Structural Metal Fabricator?

A Structural metal fabricator is an individual who fabricate, assemble, fit and install steel or other metal components for buildings, bridges, tanks, towers, boilers, pressure vessels and other similar structures and products.

They also use special machinery to cut the metal into the required pieces or plates. Other equipment is used to punch, roll, or straighten the pieces before they are fastened together.

They are employed in structural steel, boiler and plate-work fabrication plants and by heavy machinery manufacturing and shipbuilding companies.

Under the National Occupational Code  list (NOC), the NOC code for Structural Metal Fabricator is 7235.

Duties of Structural Metal Fabricators 

However, if you are planning to immigrate to Canada as a Structural Metal Fabricator, thereare expected tasks and duties you are expected to Carry out. They include;

  • Study engineering drawings and blueprints, determine the materials required, and plan the sequence of tasks to cut metal most efficiently.
  • Construct patterns and templates as guides for layouts.
  • Lay out reference points and patterns on heavy metal according to component specifications.
  • Rig, hoist and move materials to storage areas or within worksite.
  • Assemble and fit metal sections and plates to form complete units or subunits using tack welding, bolting, riveting or other methods.
  • Set up and operate various heavy-duty metal-working machines such as brake presses, shears, cutting torches, grinders and drills, including computer numerical control (CNC) equipment, to bend, cut, form, punch, drill or otherwise form heavy-metal components.
  • Install fabricated components in final product.

Examples of jobs under Structural Metal Fabricator

If you qualify under the NOC code 7235 of structural metal fabricator, you can get employment opportunities under the following job titles.

  • Apprentice fitter – shipbuilding
  • Apprentice metal fabricator
  • Apprentice metal shipwright
  • Apprentice ship-fitter
  • Apprentice ship’s plater
  • Apprentice steel fabricator
  • Apprentice structural metal and plate-work fabricator
  • Apprentice structural steel and plate-work fitter
  • Apprentice structural steel fabricator
  • Bridge and girder plater
  • Fabricator – structural metal
  • Fitter – metal fabrication
  • Fitter – shipbuilding
  • Fitter – structural metal fabrication
  • Fitter lead hand – structural metal and platework
  • Marine steel fitter
  • Metal fabricator
  • Metal fabricator – structural metal and platework
  • Metal fabricator (fitter)
  • Metal preparation lead hand – structural metal and platework
  • Metal shipwright
  • Plater
  • Plater – shipbuilding
  • Plater-welder
  • Plate work fabricator
  • Plate work fitter
  • Shipbuilding fitter
  • Ship fitter
  • Ship fitter apprentice
  • Ship’s plater
  • Steel fabricator
  • Steel fabricator – structural metal and plate-work
  • Steel fitter – metal plate-work
  • Steel fitter – structural metal
  • Steel plate sharper – ships

Jobs excluded from Structural metal fabricator in Canada

  • Boilermakers (See 7234 Boilermakers)
  • Metalworking and forging machine operators (See 9416 Metalworking and forging machine operators)
  • Structural steel erectors (See 7236 Iron workers)
  • Supervisors of structural metal and plate-work fabricators and fitters (See 7201 Contractors and supervisors, machining, metal forming, shaping and erecting trades and related occupations)
  • Welders and related machine operators (See 7237 Welders and related machine operators)
Immigrate to Canada as a Petroleum Engineer

Requirements to Immigrate to Canada as a Structural Metal Fabricator

Generally, before your application process to immigrate to Canada as a structural metal fabricator, there are requirements you need to meet. These requirements include the general and specific requirements to immigrate to Canada as a structural meta fabricator

General requirements to work in Canada

The general requirements you need to immigrate to Canada are;

#1. Education requirements

Generally, the minimum educational requirements for you to immigrate to Canada as a structural metal fabricator is the completion of secondary education.

However, you stand an additional advantage when you have a bachelor’s degree or master’s degree.

#2. Age requirements

Your age will determine if you can immigrate to Canada as a structural metal fabricator or not.

Moreover, in Canada, all immigrants must reach the working age (18 years) before they can be allowed to immigrate as a worker.

#3. Language requirement

Obviously, if you want to work and live in Canada you must meet their language benchmark in speaking reading writing, and listening.

However, you need to partake in a proof of English or French language proficiency test.

Examples of these tests include IELTS, TOEFL, CAEL, PTE, CELPIP, TCF Canada, TEF Canada, among others.

#4. Adaptability

As we all know that health is wealth, medical fitness is very crucial for your immigration to Canada.

You must be able to prove that you are medically fit to adapt to Canada’s weather and climate.

#5. Work experience

However, the minimum work experience you need to immigrate to Canada as a community service worker is 1 year of full-time work experience or a part-time job that is equivalent to one year.

In addition, you must have proof for your profession through the experiences you have gathered in your previous working places.

#6. Your partner’s skills      

If will be of advantage having a partner that is skillful because your chances to immigrate to Canada as a structural metal fabricator will be higher during the verification process.

Specific requirements to immigrate to Canada as a Structural Metal Fabricator

  • Completion of secondary school is usually required.
  • Completion of a three- to four-year apprenticeship program
    or
    A combination of over four years of work experience in the trade and some college or industry courses in structural steel and plate-work fabrication is usually required to be eligible for trade certification.
  • Trade certification for metal fabricators (fitters) is available, but voluntary, in all provinces.
  • Trade certification for marine technicians is available, but voluntary, in Nova Scotia and British Columbia.
  • Trade certification for boiler and related equipment assemblers and structural metal fabricators (non-construction) is available, but voluntary, in Quebec.
  • Red Seal endorsement is also available to qualified metal fabricators (fitters) upon successful completion of the inter-provincial Red Seal examination.
Immigrate to Canada as a Survey Clerk

Pathways to immigrate to Canada as a Structural Metal Fabricator

Immigrating to Canada as a structural metal fabricator has four pathway programs in which you can immigrate easily and successfully. They include

  • Express entry
  • Provincial Nominee Program
  • In-Demand occupations
  • Job offer

 Express entry

This pathway to Canada remains the most preferred considering the ease and the multiple programs through which you can immigrate to Canada as a community service worker are listed below.

However considering the job description and duties of a structural metal fabricator under the NOC code 7235, exploring the Federal skilled program as pathway to Canada will be easier and beneficial.

Provincial Nominee Program

Indeed, all provinces in Canada at different time or period offer provincial nominee programs for immigrants to Canada by constantly updating their occupation in demand list with available job offers.

However, using the PNP to immigrate to Canada as a structural metal fabricator will require you to work for minimum of two years in the province before you can move to another.

In-Demand occupations

Undoubtedly, structural metal fabricator falls under the in-demand jobs in Canada. You can as well use it as an option to immigrate to Canada.

Job offer

This is an easy pathway to immigrate to Canada as a structural metal fabricator. However, before you can do this, you must get a valid job offer from a Canadian employer.

In addition, the employer must get a certificate from the Labor Market Impact Assessment (LMIA) before employing.

Steps to immigrate to Canada as a Structural Metal Fabricator

Generally, for you to immigrate to Canada as a structural metal fabricator, there are certain steps you must follow.

Step 1Create an Express entry account

However, to do this you must first create an Express Entry profile at the official IRCC website.

Furthermore, you must ensure that all information that you input is correct and valid. Invalid info can make you forfeit your application.

Step 2: Enter a program

Definitely, you can either choose from Canada Express entry, federal skilled worker program, federal skilled trade programs and provincial nominee program

Step 3Find a job in Canada

It is important you know that getting job offer in Canada can boosts your CRS points.

However, you must be the right candidate for the job and no Canadian citizen as a qualification to do what you have been offered to do.

Step 4: Get an invitation to apply

Moreover, an invitation to apply will only be sent to qualified candidates.

Therefore, if you are qualified you will be invited to apply for permanent residency of which you must do so within 60 days.

Step 5: Submit application with supporting documents

Once you receive an invitation to apply, you have only 60 days to send your reply to IRCC. If you fail to do so, you may lose your chance of going to Canada.

Therefore, you should start gathering your documents once you begin your immigration process.

Step 6: Get your work permit

Finally, the next thing is to get your work permit. However, you will only get a reply that your permit has been processed.

However, if you do not receive such news, it means that your documents are missing or that some details in your application are not correct.

Frequently Asked Questions

What is the average salary of a structural metal fabricator?

The average salary of a structural metal fabricator is $77800 per year.

Are structural metal fabricators in high demand in Canada?

Yes, structural metal fabricators are in high demand in various provinces and territories in Canada.

Conclusions

Therefore, as a structural metal fabricator, you can immigrate to Canada and start a new life.

We hope this article provide you with all the information you need to immigrate to Canada as a Structural Metal Fabricator.